LT303 API 16D series products – BOP well control plastic hose: mainly used in hydraulic control of blowout preventers. The maximum pressure is 5000PSI, and the burst pressure can reach 7500PSI. It can also be immediately exposed to flames at a temperature of 705 ° C for more than 5 minutes to ensure that the automatic control system can operate in an emergency. The inner viscose is made of NBR plastic, 4 layers of high-toughness spiral stainless steel wire is coiled, and the outer armored cable maintains the body. The overall characteristics meet the technical standards of API 16D. The…

   Lightweight composite hose is lightweight. Compared with similar types of rubber hoses, it is 40% lighter and 30% lighter than metal hoses. Reducing the labor intensity of workers is conducive to practical operation and improving efficiency. It is flexible and bendable, and will not be limited by the working space. The utility model patent can still operate normally under the small and minimum turning radius, but at the bending position, the tube keeps a ring shape and expands and contracts. The lumen falls off and the tube body breaks. Litong’s Super Hercules products are marked with high pressure durability…

   Letone Industrial Hose R&D Base, R&D and production of various types of rubber and plastic pipes, has flexible and easy grinding properties in terms of nominal diameter, pressure, burst pressure, and ambient temperature of plastic hoses. Manufactured according to customer needs, Litong Industrial production supports customized large-diameter, larger 12″ feet, and currently has 55 professional and technical personnel with graduate or above. Unique pipeline, high-risk transportation under ultra-high pressure, with hydrogen chloride (H2S) and other Gas mixture of dangerous gas and various water-based, oil-based, foam plastic well kill fluids, etc. 400PSI transmission pipeline with SUPERTUFF surface layer, mainly used for fracturing fluid, sand…

   LT1216 150PSI Hot Tar Asphalt Suction and Discharge Pipe The pipe body is used for liposuction and discharge of nicotine and hot asphalt on trucks and oil tankers below 180°C. The internal structure is made of black nitrile rubber with extremely strong High temperature resistance, high toughness man-made fibers are used in the middle to improve, and the chlorosulfonated polyethylene plastic used in the surface layer has the characteristics of good wear resistance, heat resistance, weather resistance, aging resistance and bitumen resistance, which is very good. The performance indicators of the tube body are maintained, and the service life is also…

Advantages of a High-Pressure Washer Wire Water Hose When working with a high-pressure washer, it is important to be aware of the hazards of running over the hose. Normally, these hoses are made from a round wire braid, but these can develop weak spots over time, which can eventually cause failure. Light vehicles cause less damage to high-pressure washer hoses than large trucks and heavy equipment. Pneumatic tires also cause less damage than hard rubber tires. Hot hoses are more likely to be broken or crushed than cold hoses. High pressure automatic car washing machine The Automatic car washing machine…

At present, the rapid development of various industries also promotes the continuous innovation of technology and the wide application of various facilities, and various wear-resistant pipe fittings are an indispensable special purpose in the process of raw material storage and transportation tool way. High-pressure wear-resistant hoses are relatively widely used in industrial production infrastructure, and they are often seen in other industries, such as mortar transportation or raw material suction and discharge, etc., with a variety of excellent characteristics. In order to improve the replacement efficiency of cement mortar and ensure that the cementing truck can effectively carry out the…

What is a high pressure anti-wear structure? Wear-resistant stainless steel wire wound wear-resistant rubber tube, the improvement layer is a high-strength steel wire winding layer, and after special treatment, most of the inner layer is UPE, and the surface layer is polyamide or polyurethane, which has small liquid resistance and wear resistance. , Small volume expansion, solvent corrosion resistance, light weight, small diameter, so it is generally used for raw material transportation or chemical mixture transportation in the environment. Select carbon steel or stainless steel plate, clamp and processing technology for pipe joints. In the process of selecting wear-resistant hoses,…

During the operation of the towed water pump equipped with the concrete wear-resistant pipe, it is strictly forbidden to stretch out and pour the material into the water storage tank. In the water pumping process, the concrete raw material should be ensured above the mixing shaft, and there should be no suction or pump without material. If the pump is stopped for a long time, be sure to start the pump every (15-30) minutes, reverse the pump 1-2 strokes, and pump the pump 1-2 strokes to prevent the concrete material in the pump from solidifying in the wear-resistant pipe. Industrial…

Choosing the Right Low Temperature High Pressure Tube It can be difficult to choose the right high-pressure pipe. High-pressure hoses can be sensitive to temperature changes. A fitting that isn’t designed for these temperatures will not perform as well. The temperature limit is a crucial factor when determining which fittings are right for your piping system. Luckily, there are a number of ways to ensure that your high-pressure pipes are safe for your application. Encyclopedia of high pressure imported tubing Polyamide is a polymer material that is characterized by high tensile strength and good coupling retention in high temperature and…

At present, the wear-resistant hoses on the market are divided into the following types according to the structure and pressure (A, B, C, D working pressure from low to high) four types: Type A: its working pressure is too high Between 1.5MPa and 2.5MPa (the test and blasting pressure is about 1.5 times and 2.5 times the working pressure), the inner and outer rubber components of the tube body are generally wear-resistant and weather-resistant plastics, which improve the application cost of the neutral cloth. As a reinforcement layer; Type A is relatively simple in terms of production cost and process,…