The working principle of ultra-high pressure cleaning is relatively simple. The high-pressure pump is used to shoot out high-pressure water or other liquids, and the high-pressure water is converted into high-flow water at the nozzle according to the ultra-high-pressure cleaning hose, because the high-pressure liquid high-pressure water jet of the high-pressure cleaning machine has Washing, wedge splitting, cutting, cutting and other compound pulverizing functions, so it can immediately pulverize the fouling materials and wash them away, so as to realize the separation of fouling layer and wall thickness. This method is much faster than traditional thorough manual work, and is the best choice for cleaning work. The Teflon tube is actually a PTFE tube, which is extruded by a high-quality plunger pump, and a unique production process is used to make the seamless steel tube and the plastic hose closely connected. It has good heat resistance and cold resistance characteristics. The temperature can reach 300 °C in a short period of time. Generally, it can be used continuously in the middle of 180 °C ~ 220 °C. It can operate at freezing temperature without aging, and it will not dissolve at high temperature. Distinguish rubber depending on hose integrity Whether the hose needs to be replaced: One way is to squeeze the hose. The sandblasting hose needs to be squeezed once every 20cm, and the suitable hose is not easy to squeeze. If there is a diastolic pressure of the hose, it means that the inner cavity is eroded by the wear-resistant material passing through, and it should be replaced. If there is one and only one dent, and it is close to the top, the damaged part can be cut off and the connector can be connected to the end.
The company has been doing product research and development at the fiber material level for many years, and it is used in many aspects such as hydraulic transmission systems, industrial production liquid hoses, oil drilling and production hoses, FDA food and pharmaceutical hoses, rubber products, and liquid coupling materials. Etc., food pipes have obtained FDA certification, and oil drilling and production hoses have obtained API product certification. Commodities are more competitive, and the level and application fields are improved. The high-end oil drilling and production hose field has passed the API verification and conforms to API 7K, 16C verification.

In recent years, large-diameter hoses, wear resistance, pressure and coiling volume are the inevitable trends for the continuous development of hoses. Industrial production machinery and equipment are exquisitely designed and assembled more closely. The new wear-resistant hose has a small bending radius. Therefore, even if the quality of the product is very high, if the hose cannot be used and maintained in a standardized manner, it will affect its quality of use and service life, resulting in unnecessary major accidents, resulting in economic losses and reducing high-pressure wear-resistant hoses. stability. Stainless steel corrugated metal hoses are suitable for transporting strong corrosive chemicals and are widely used in extreme environments and industries such as crude oil, chemical plants, and metallurgical industries. The pipe body is made of 316L stainless steel and reinforced with 304 stainless steel plate. This pipe can work in a natural environment with a temperature of -270℃~700℃ (-454℉~1292℉), and its safety performance is 4: 1. It has a high safety factor, and the tube body specifications can also be customized according to Party A’s requirements, generally below 8 inches.