Ultra-high pressure cleaning hoses are widely used in: high pressure water jet technology industry, aviation and ship high pressure water cleaning industry, chemical explosion-proof high pressure cleaning industry, machinery manufacturing high pressure water cleaning industry, automobile manufacturing cleaning solution industry, etc. The cleaning principle of the high-pressure cleaning machine is very simple, that is, high-pressure water is pumped out through a high-pressure pump or a supercharger, and reaches the nozzle through a high-pressure pipeline. The strong impact force of the jet impacts the object to be cleaned, peels off and removes the dirt, so as to achieve the purpose of cleaning.
   Because the high-pressure water jet of the high-pressure cleaner has the functions of scouring, wedge splitting, shearing, grinding, etc., it can immediately break off the scale and wash it away, so as to realize the separation of the scale layer and the pipe wall. It is much faster than the traditional cleaning method, and with the cooperation of the cleaning hydraulic support, it can achieve the goals of good cleaning quality, low cleaning cost, high efficiency, no pollution to the environment, high safety, and a wide range of applications.

   For the high-pressure hose selected for the high-pressure cleaner, its inner diameter must match the diameter required by the high-pressure pump. Damaged high pressure hose.
Moreover, when selecting a high-pressure hose, it should be determined according to the technical parameters of the high-pressure pump. According to its parameter requirements, choose a hose with a matching pressure, and do not use an operation method that exceeds its actual pressure, otherwise it will affect the normal use of the high-pressure hose. years. In addition, products that withstand higher pressure can be appropriately selected, which makes it easier to extend its service life.
   In addition, the high-pressure hose of the high-pressure washer must be properly used, maintained and maintained in strict accordance with the relevant rules. Do not twist the hose by hand while the high pressure cleaning equipment is in operation. If it is really necessary to bend due to construction needs, the bending radius should not be too small, and it should not be bent at a small angle.