The production floor is where every factory works and is also where it is kept clean and tidy. Every factory is faced with different kinds of dirt, and the usual manual cleaning and chemical cleaning may clean it up, but what are manual cleaning and chemical cleaning? The following are their respective application principles:
   1. Chemical cleaning
  Chemical cleaning method is to use chemicals to carry out chemical or physical reaction with scale under certain conditions to remove scale. For the coke scale produced by heat transfer oil, most of them are cleaned with organic solvents. The main principle is physical dissolution. However, in actual operation, there are disadvantages such as unsatisfactory cleaning effect, high cleaning cost and environmental pollution. In addition, when the rust seriously blocks the pipeline, it cannot be cleaned.
   2. Manual cleaning
  The commonly used methods of manual cleaning are steel prying, hammer smashing, electric hammer drilling and other methods, but the effect is not ideal, and there are disadvantages such as easy damage to equipment, high labor intensity for workers, and insignificant cleaning effect.
  In fact, these two cleaning methods have their own advantages and disadvantages. At this time, we can choose a high-pressure cleaner for cleaning, which is easy to operate and takes no time. For the high-pressure hose selected for the high-pressure cleaner, its inner diameter must match the diameter required by the high-pressure pump. Premature damage to the high pressure hose.
  Our LT799A 6S ultra high pressure resin hose is primarily used in factory, industrial, marine, pipe and vessel cleaning applications.

  Pressure Range: 1200 ~ 1400 bar (17400 ~ 20300 psi)
  Features: Water jet applications, especially for jet guns
  Features: Ship, Tank and Vessel Cleaning
  Features: General industrial cleaning applications
  Features: Remove dirt deposited on the surface
   Due to the characteristics of high-pressure cleaning, most factories use high-pressure cleaning. It does not mean that other cleaning methods are not good, but the selected scenarios are different, and the methods are naturally different. Among them, LT799 ultra-high pressure resin hoses are uniformly matched with the anti-pull-off hose joints independently developed by our company, which are infinitely close to the sealing goal of zero leakage, and are the quality choice for users of high-pressure cleaning equipment.