Confirm selection of hose suitable for conveying steam
The category of the hose should be printed not only on the packaging, but also on the body of the hose in the form of a trademark
To correctly identify the area where the steam pipe is used
a) What is the pressure of the steam
b) Whether the maximum working pressure can be reached
c) What is the temperature of the steam
d) What is the humidity and dryness of the steam
e) how often is used
f) What are the external conditions for the hose
Spilled and corrosive chemicals attached to the hose have a destructive effect on the surface of the hose
Tube installation and storage
Determine the pipe joint used for the steam pipe, the steam pipe joint is installed outside the pipe, and its tightness can be adjusted as required.
line adjustment. Fittings are to be installed in accordance with the manufacturer’s instructions. Check the tightness of the joint according to the purpose of each pipe
Do not bend the tube near the joint
When not in use, use a reasonable method to store the tube
Minimizes damage to tubes in storage by placing on racks or trays
Do not hang the tube on hooks, nails or other equipment as this will damage the tube
Regular repairs and maintenance of steam pipes
The steam pipe should be replaced in time. Always check that the tube is still safe to use. Operators should look out for the following signs:
The outer protective layer is blistered or swollen
The outer layer of the tube is cut and the strength layer is exposed
Air leaks at the joints or leaks on the pipe body
Damage to flattened or knotted parts of the tube
A decrease in airflow indicates that the tube is expanding
Any abnormal signs mentioned above should be replaced in time
Replaced tubes should be carefully inspected before reuse
Safety
Provide the operator with comprehensive safety clothing, including gloves, rubber boots, coveralls, and goggles.
is used to prevent burns from steam or hot water
Make sure your work area is safe and orderly
Check that the fittings on each tube are secure
Do not leave the tube under pressure when not in use. Shut-off pressure extends tube life